RII30915 - Certificate III
(Civil Construction Road Marking)
This qualification reflects the role of a skilled operator working with civil construction plant, who applies a broad range of skills in a varied work context, using some discretion and judgement and relevant theoretical knowledge. The individual may provide theoretical advice and support a team.
Licensing, legislative, regulatory and certification requirements that apply to this qualification can vary between states, territories, and industry sectors. Relevant information must be sourced prior to application of the qualification.
General Course Info
Course Time Frame
New Workers: Maximum 36 months under Queensland State Government Traineeship program. Where the learner is engaged outside of the Traineeship program, the 36 months still applies. Where a course runs over a reasonable timeframe, all efforts will be made to assist the participant through to completion, some situations may entail cancellation of enrolment. Where a course runs over a reasonable timeframe, all efforts will be made to assist the participant through to completion, some situations may entail cancellation of enrolment.
Experienced Workers: 2-12 months (estimate)
*The length of time taken to complete this Qualification is a variable, this is a guide only. Some may take longer or shorter time depending on variables such as availability, access to supporting evidence, work commitments and changing roles in the workplace.
Prior Qualifications: Nil
Employment: You must currently be employed in the Civil Construction industry or have had a significant amount of experience and access to paperwork to demonstrate your experience.
State: To be eligible for the User Choice Program which is a Queensland initiative where the Government subsides the cost of your training: You must not have completed a Qualification at the same level or higher level as the one you are enrolling in within the last 7 years, and must be an Australian Citizen, Permanent Resident or be a New Zealand passport holder who has resided in Australia for 6 months or more.
Federal: Federal funding is an incentive program for Employers who support their Employees within a Traineeship arrangement. Employer may be eligible for Incentives if the learner is newly employed with the company; i.e. Under 3 month’s fulltime and less than 12 months part time/casual. They must not have a Cert 3 or 4 completed in the last 7 years (qualifications completed through school are exempted), If they have a Diploma or higher (including a degree), they are ineligible (regardless if the degree is for a different industry) and must be an Australian Citizen, Permanent Resident or NZ passport holder who has resided in Australia for 6 months or more.
Student Contribution Fees: SCT’s or Tuition Fees are charged to the Trainee to encourage contribution to their own future pathways. For this Qualification the range of fees are $1000 - $2500. KASE accepts payment plans and credit card payments.
For example: A Trainee who takes 18 months to complete their Qualification and the SCT fee is $1500, the payment plan would be $83.33 per month. SCT fees are calculated at $1.60 per nominal hour of the competencies selected within a Qualification, this varies for each individual and will be explained upon Induction. Employers often opt to contribute to this fee on behalf of their worker.
Fee for service fees: Each fee is calculated on a case by case basis, the minimum fee for this Qualification is $2500; where a learner would have significant experience and is not in a remote location. The maximum fee for this Qualification is $5000. Travel and accommodation costs, where applicable, are additional to the minimum and maximum fee, this will be negotiated prior to enrolment via written notification. The fee for service fees are split into 2 payments, maximum $1500.00 deposit prior to commencement and the balance upon completion. The full amount of the fee for service fee must be paid prior to KASE issuing the Certificate.
Fee for service deposits: There is a pre-paid deposit required for FFS Learners prior to enrolment, this is non-refundable after the cooling off period (see below). The pre-paid deposit amount will not exceed $1500.00 on any given enrolment
Refunds: FFS pre-paid deposit payments are refundable if requested within the cooling off period (see below), after this period, they are non-refundable.
SCT fees are refundable only for the hours not completed within the Qualification and which have been pre-paid. Monies paid for nominal hours completed are not refundable, nominal hours are explained further once a Training Plan is generated.
Cooling off period: Where payment has been made for a fee for service arrangement, KASE will hold the fee amount in trust for 10 days, after which the deposit is non-refundable.
CreditWhere you have already achieved units that are equivalent to or higher than the units within this Qualification, you will be granted a credit when you submit a copy of your previous Qualification and when this evidence is verified.
Issuing Your CertificateKASE will issue your Certificate within 30 calendar days of completion of all assessment and paperwork requirements. Where you have not completed all components of a Qualification, you will be issued with a Statement of Attainment listing the units you have achieved in full. These documents will be kept for a period of 30 years, and you can access them by requesting a copy directly from KASE.
Support ServicesWhere applicable, KASE will direct you to the appropriate support services relevant to any support the individual may need that KASE cannot provide; this includes significant Learning, Literacy and Numeracy support needs or Government specific questions. It is the responsibility of the learner to discover these costs with the relevant body.
Consumer / RTO Rights
The ACCC states that services must:
- be provided with acceptable care and skill or technical knowledge and taking all necessary steps to avoid loss and damage
- be fit for the purpose or give the results that you and the business had agreed to
- be delivered within a reasonable time when there is no agreed end date
Where a consumer considers these guidelines were not met, please refer to our Appeals/Complaints Policy found at www.kase.com.au
Please be aware that consumer guarantees do not apply where the consumer:
- asked for a service to be done in a certain way against the advice of the business or were unclear about what you wanted
- got what you asked for but simply changed your mind, found it cheaper somewhere else, decided you did not like the purchase or had no use for it.
The RTO reserves the right to refuse engagement with a client where it sees it is unable to deliver satisfactory service, this might be due to location of the learner or exorbitant costs to the RTO, or for any other reason; this is at the RTO’s discretion. The RTO further reserves the right to refuse or withdraw enrolment where it has deemed the client unfit to enrol or where continuation of the course would result in non-compliance with the relevant Standards, State Bodies or Qualification requirements, or for any other reason the RTO sees as significant. Where this situation would occur, the RTO will notify the appropriate party via written correspondence. The recipient has the opportunity to submit a compliant or appeal using our Appeals/Complaints Policy and Procedure found on our website. Where this occurs, the issue will be dealt with through the established Appeals/Complaints Policy.
Road Marking - Core Units
Plan and organise work
Carry out measurements and calculations
Read and interpret plans and specifications
Communicate in the workplace
Use hand and power tools
Operate small plant and equipment
Work safely and follow WHS policies and procedures
Road Marking - Electives (M)
Handle and store road marking materials
Prepare surface for road marking
Handle resources and infrastructure materials and safely dispose of nontoxic materials
Implement traffic management plan
Road Marking - Electives (N)
Conduct ride on road marking operations
Conduct long line road marking operations
Conduct thermo plastic road marking operations
Road Marking - Electives (O)
Carry out manual excavation
Support plant operations
Carry out basic levelling
Carry out concrete work
Escort mobile road marking operations
Conduct pedestrian road marking operations
Conduct road marking measuring operations
Conduct airless and atomised spraying operations
Install raised pavement markers
Operate a forklift
Operate elevating work platform
Operate a vehicle loading crane
Maintain site records
Conduct local risk control
Respond to site based spills
Cut, weld and bend materials
Work safely at heights
Control traffic with stop-slow bat
|We're here to help, so please use the contact form below or click / tap the links at the very top of this page to contact us and we'll get back to you as quickly as possible!|